NAD T531 owner manual Connecting To A Tv, Connections

Connections

CONNECTING TO A TV

To SCART

21-pin SCART cable (not supplied)

VIDEO OUTPUT SELECT switch

				DIGITAL	AUDIO
				OUT	OUT
				COAXIAL	L
		DIGITAL
		OUT
			S-VIDEO		R
			TO TV
			COMPONENT
PAL	AUTO	OPTICAL	VIDEO	S-VIDEO	VIDEO
	NTSC		OUTPUT	OUT	OUT

For using SCART’s RGB signal, set the VIDEO OUTPUT switch to COMPONENT or for using S-VIDEO OUT jack, set the VIDEO OUTPUT switch to S-VIDEO

To S-VIDEO OUT To AUDIO (L/R)/VIDEO OUT

Audio/Video cable (supplied)

If the TV has an S-video input, connect the DVD player with the S-video cable.

To 21-pin SCART socket

To video input

To audio input

To S-video input

TV or monitor with audio/video inputs

GB

NOTES

•Refer to the owner’s manual of your TV as well.

•Before you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.

•Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted because DVD video discs are copy protected.

•In case of the TV set corresponding to RGB signal, the RGB signal is automatically selected in the TV (Only when the VIDEO OUTPUT Switch is set to COMPONENT on the Rear Panel).

WARNING

Do not set the Digital Audio Output of this DVD player to Dolby Digital unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to Selecting Digital Audio Output on page 20).

13