Napco Security Technologies XP-400 installation instructions 81 82 Wireless Keyfobs

WI1370 XP-400 Installation Instructions

[71-74] Wireless Transmitters

Enter the RF ID# and the point number that is to be mapped to the zone.

Programming Example

Map point 1 of a window door transmitter with an RF ID# of 0012B0:0 to Zone 3.

1.Enter Dealer Mode.

2.Enter b(beeps) 73(beeps)

3.Enter

012G200

4. Enter 1(beeps)

Note: If the RF ID# in step 3 is not entered correctly the keypad will emit a 1 second tone indicating incorrect entry. Repeat steps 2 - 4 above.

[81] - [82] Wireless Keyfobs

The GEM-KF is a hand held wireless transmitter capable of Arming and Disarming the control panel and/or activating 2 Auxiliary Functions. To activate the auxiliary functions, press and hold the Mor Nkey for 1.5 seconds (see WI752

for more information).

Enter the RF ID# and AUX 1 and AUX 2 options for each Keyfob.

AUX 1 & AUX 2

Programming Options:

1 Panic

Program a 1 in the AUX 1 and/or AUX 2 option to initiate a panic alarm when the M or N buttons on the Keyfob are

pressed.

Additional programming required: Keypad Panic (GG) [20-3]

Panic Report to Telco 1[36-2] and/or Telco 3 [56-3].

Audible Panic (Optional) [21-1]

2 AUX

Program a 2 in the AUX 1 and/or AUX 2 option to initiate a AUX alarm when the M

or Nbuttons on the Keyfob are pressed.

Additional programming required: Keypad AUX (FF) [20-2]

AUX Report to Telco 1[36-2] and/or Telco 3 [56-2].

3 Bell ON

Program a 3 in the AUX 1 and/or AUX 2 option to turn the Bell ON when the Mor

Nbuttons on the Keyfob are pressed. Press the Lbutton to turn the Bell OFF.

4 PGM

Program a 4 in the AUX 1 and/or AUX 2 option to activate the PGM Output when the M or N buttons on the Keyfob are

pressed. Press the L button to turn the PGM Output OFF.

5 Instant

Program a 5 in the AUX 1 and/or AUX 2 option to activate Instant Mode when the M or N buttons on the Keyfob are

pressed.

6 Access on PGM

Program a 6 in the AUX 1 and/or AUX 2 option to activate the PGM Output for 5 seconds when the Mor Nbuttons on

the Keyfob are pressed. Addition programming required: Enable Access Output [23-2]

20