Napco Security Technologies XP-400 Programming the Panel, Defaulting the Panel, Downloading

Programming the Panel

Refer to XP-400 Programming Instructions (WI1371)

Defaulting the Panel

1.Remove power from the panel.

2.Remove all wiring from terminal 15 (PGM) and terminal 3.

3.Connect terminal 15 (PGM) to terminal 3.

4.Apply power to the XP-400 control panel.

5.After a few seconds the W ARMED, X READY and HSYSTEM TROUBLE LEDs will flash.

6.The keypad will beep 3 times indicating the panel default values have been loaded.

7.Remove wiring between terminal 15 (PGM) and terminal 3.

8.Re-install original wiring for terminal 15 (PGM) and terminal 3.

NOTE:

Any programming in Dealer Options 1 [96] and Dealer Options 2 [97] will not be defaulted. If Dealer Code Lockout has been programmed the panel will not default the Dealer Code.

Keypad Programming

Refer to WI1371 for information on keypad programming.

Downloading

The XP-400 panel can be download/uploaded with PCD3000 software using the Ring Method, Answering Machine Override (Second Call) or A6Method of downloading. The panel can

also be automatically downloaded/uploaded using PCD2000 Software running PCPreset. For Site Initiated Downloaded, see Auto Download ID Number [93].

Local Downloading

Wire as shown in Figure 1. Use the power up or A6 method of establishing a connection. The

power up method is recommended if the panel is attempting to report.

+12

-13

14

15

16

17

18

19

+PWR

GND

GREEN

PGM

TIP

RING

TIP

RING

(-)

RED

BLACK

RED

TELCO

PHONE

GREEN

PCL2000A

MODEM

FIGURE 1 LOCAL DOWNLOAD

Remote Downloading

Wire as shown in Figure 2. The panel can be remotely download/uploaded using any one of the following methods:

1.The A6method

2.Call-in method

3.Answering Machine Override (Second Call)

4.Site-Initiated (PCPreset & A6)

5.Automatic Downloading (Using PCPreset)

+12

-13

14

15

16

17

18

19

+PWR

GND

GREEN

PGM

TIP

RING

TIP

RING

(-)

TELCO

PHONE

RED

GREEN

GRY

BRN

RJ31X

XP-400 Panel at the site
			TELCO
			PCI2000
J1	J2	J3	J4	J5 LINE
		LOCAL	TELCO	OUT TO
TO COMPUTER	TO EXTERNAL	TO
	MODEM
				MODEM

FIGURE 2 REMOTE DOWNLOAD

5