Napco Security Technologies XP-400 Downloading, 90Callback Telephone Number, 91Ring Count

7 Full Set System

Program a 7 in the AUX 1 and/or AUX 2 option to Fully Set the System when the K

and the Mor N buttons on the Keyfob are pressed, or when the M or N

buttons are pressed when the system is armed with Exit/Entry Follower Zones or Home/Away with Delay Zones that have been bypassed.

8 Interior

Program an 8 in the AUX 1 and/or AUX 2 option to Bypass Exit/Entry Follower Zones or Home/Away with Delay Zones when the M or N buttons on the Keyfob are

pressed (only if the system is programmed exclusively for Home/Away with Delay Zones).

Downloading

[90]Callback Telephone Number

Program the phone number of the downloading computer to be dialed by the panel during a high security download.

[91]Ring Count

Program the number of rings before the panel will pickup. Ring Method [92-1] (Downloading Features) must also be selected.

[92]Downloading Features

(1)Ring Method - Enable the ring method of downloading. The panel will pick-up on the number of rings programmed in Ring Count [91].

(2)Answering Machine Override - Using the downloading computer, call the panel. When the operator has determined that the panel has received 1-2 rings, pressing the u key will cause the downloading computer to immediately re-dial the panel. The panel will pick-up on the first ring.

(3)Function 6 Download - Select to enable the A6method of downloading (pg. 8).

(4)Reserved.

[93]Auto Download ID Number

Enter the Number that is used by PCPreset when downloading using Site Initiated Auto Downloading (A6).

The requirements for Site Initiated Auto Downloading are as follows:

1.Download Computer running PCPreset.

2.Program the telephone number of the Download Computer in location [90] Callback Telephone Number.

3.Program location [93] with the number of the PCPreset account that is to be downloaded.

PCPreset

1. Create the XP-400 account to be d o wn l o a d e d u s i n g P C D 3 0 0 0 Quickloader Software.

2.Create a List using PCPreset.

3.Select the account by pressing tt. Select the desired account from the list of PCD3000 accounts available. (The location in the list is the Auto Download ID Number [93])

4.Tag the list by entering aD

(download)

5.Enter Standby Mode by entering o.

The Computer is now in STANDBY

21