PROBLEM |
| CAUSE |
| SOLUTION |
|
|
|
| |
NO SOUND | • | Power AC lead unplugged or power not | • Check if AC lead is plugged in and power | |
|
| switched on |
| switched on |
| • | Tape Monitor selected | • | |
| • | Mute on | • | Switch off Mute |
|
|
|
| |
NO SOUND ON ONE CHANNEL | • | Speaker not properly connected or damaged. | • Check connections and speakers | |
| • Input lead disconnected or damaged | • Check leads and connections | ||
| • In Setup “OFF” for surround speaker selected | • Select appropriate Surround mode (large or | ||
|
|
|
| small) |
|
|
|
| |
NO SOUND ON SURROUND CHANNELS | • | No surround mode selected | • Select a Surround Mode | |
| • | Mono sound source | • Test system with Stereo or Dolby Surround | |
| • Speakers not properly connected |
| material | |
| • Check speakers and connections | |||
| • Surround volume level too low | • Increase surround volume level | ||
|
|
|
| |
NO SOUND ON CENTER CHANNEL | • | In Setup “OFF” for center speaker selected | • Select appropriate Center mode (large or small) | |
| • Speaker not connected properly | • Check speaker and connection | ||
| • Center volume level set too low | • Increase center volume level | ||
|
|
|
| |
“DOLBY DIGITAL” OR “DTS” | • | Source not connected using digital inputs | • Connect digital output of source to T741 | |
FUNCTION DOES NOT WORK |
|
|
|
|
|
|
|
| |
WEAK BASS/ DIFFUSE STEREO IMAGE | • | Speakers wired out of phase | • Check connections to all speakers in the system | |
|
|
|
| |
REMOTE CONTROL HANDSET NOT WORKING | • | Batteries flat, or incorrectly inserted | • Check or replace batteries | |
| • IR transmitter or receiver windows obstructed | • | Remove obstruction | |
| • IR receiver in direct sun or very bright ambient | • Place unit away from direct sun, reduce amount | ||
|
| light |
| of ambient light |
|
|
|
| |
NO SOUND WITH TUNER | • | Antenna leads incorrectly connected | • Check antenna connections to receiver | |
| • Station not selected or weak signal with FM | • | ||
|
| Mute on. |
|
|
|
|
|
| |
NOISE, HISS ON AM AND FM | • | Weak signal | • Check station tuning. Adjust or replace antenna. | |
|
|
|
| |
DISTORTION ON FM | • | • Check station tuning. Adjust or replace antenna | ||
|
| station |
|
|
|
|
|
|
|
WHISTLES OR BUZZES ON FM & AM | • Interference from other electrical sources - |
| computers, games consoles |
•Check station tuning. Switch off or move the source of the electrical noise
WHISTLES OR BUZZES ON AM | • Interference from fluorescent lighting or |
| electrical motors |
•Check station tuning. Adjust or replace AM antenna
NO RDS NAME (PS) | • | Station signal too weak. | • | Check station tuning. Adjust or replace antenna |
| • | Station not transmitting RDS data | • | No remedy |
GB
19