USING THE T 743

You may operate the T 743 receiver from its front panel or via the HTR 2 remote control. Since the remote will be the primary controller for most cases, we will focus on remote-controlled operations. Be sure also to read the section, "Front Panel" above.

SELECTING SOURCES

With the HTR 2’s remote's [Amp] device selected, the remote’s numeric-key section directly selects the receiver’s inputs, plus the internal tuner ([Tuner), Tape Monitor ([Tape]), and multichannel input ([Ext. 7.1/ 5.1]) refer to the red labels directly above each key.

When an audio-only source (CD, DISC, TUNER) is selected, the most recently-selected video signal remains selected, until another audio-video input is selected

When you change sources, the VFL will display the new input in its primary display.

A newly selected input's listening mode (Stereo, EARS, Pro Logic II, etc.) will revert to the mode to which it is configured on the <Input Settings> line of the setup menu, unless the incoming signal is a Dolby Digital or DTS source, in which case the input will be set automatically to the appropriate decoding mode.

ADJUSTING THE VOLUME

Use the HTR 2 remote's <Volume up/down> keys to adjust the "master volume" of the T 743, raising or lower all channels together. Note that:

A momentary keypress will change the master volume by 1 dB increments; if you hold down <Volume up/ down> the master-volume change will "run-on" until the key is released.

The T 743's OSD will show the volume setting as a line graphic with a numeric display above in dB relative to the reference level.

Since recordings vary considerably in overall average level, there is no imperative to listen at any particular master-volume setting. A setting of -20 may sound "as loud" from one CD or DVD as -10 does from another.

If muting has been activated (below), adjusting master-volume via the HTR 2 remote or the front-panel knob automatically releases the mute function.

The T 743 will power-up from Standby mode at whatever master volume setting was last used; however, if the prior setting was greater than –20 dB the T 743 will power up to –20 dB. This prevents inadvertently beginning a session at excessive volume.

MUTING THE SOUND

Use the HTR 2 remote's <Mute> key to silence all channels completely. Muting is always available, regardless of source or listening mode selections. Note that:

Cycling through Standby or powering off does release muting; the T 743 will return from Standby with muting off if Standby was invoked with muting on.

Changing input or listening-mode selections does not release muting.

Adjusting the master-volume upward via the HTR 2 or the front-panel knob automatically releases the mute function.

LISTENING TO RADIO

The T 743’s internal AM/FM tuner offers very high quality sound from radio broadcasts. Note that reception and sound quality will always be dependent to a degree on the type of antenna(s) used, as well as proximity to the broadcast origin, geography, and weather conditions.

ABOUT ANTENNAS

The supplied ribbon-wire FM antenna can be connected to the rear-panel FM-antenna input using the ‘balun’ included adapter, and should be fully extended to form a “T”. This folded-dipole antenna will usually work best oriented vertically, with the arms of its “T” full outstretched and arranged perpendicular to the origin of the desired broadcast. There are no ‘rules,’ however, and experimenting freely with antenna placement and orientation may yield the clearest sound and lowest background noise. In areas of poor FM reception, an exterior FM antenna can improve performance dramatically. If radio listening is important to you, consider consulting an antenna installation professional to optimize your system.

The supplied AM ‘loop’ antenna will usually provide adequate reception. However, an exterior AM antenna can be used to improve reception; consult an antenna professional for more information.

ENGLISH

19

Page 19
Image 19
NAD T 743 owner manual Using the T

T 743 specifications

The NAD T 743 is an esteemed model in the realm of home theater receivers, reflecting the brand's commitment to delivering high-quality audio performance and versatile features designed to enhance the home entertainment experience. This receiver is particularly noted for its ability to bridge the gap between two-channel audio and multi-channel surround sound, making it an attractive option for audiophiles and movie enthusiasts alike.

At the heart of the NAD T 743 is its powerful amplifier section, which is capable of delivering robust sound with clarity and precision. The receiver boasts a total output of 80 watts per channel into 8 ohms, allowing it to easily drive a range of speaker configurations while maintaining a dynamic and engaging sound. The use of NAD's proprietary PowerDrive technology ensures that the receiver can deliver high peak power without sacrificing performance or dynamic range, which is vital for both music and film playback.

One standout feature of the T 743 is its support for various audio formats, including Dolby Digital and DTS, enabling users to immerse themselves in a lifelike surround sound experience. This receiver also facilitates easy integration with other audio and video components, thanks to its multiple inputs and outputs, including optical and coaxial digital inputs, component video inputs, and a range of analog connections. Additionally, the T 743 features a robust built-in AM/FM tuner, providing access to a wide variety of radio stations.

NAD’s engineering excellence is evident in the T 743's user-friendly interface, which includes an intuitive remote control and on-screen display. This makes it accessible for users of all experience levels to navigate through settings and customize their audio experience. Furthermore, the receiver incorporates a discrete circuit design, which helps reduce noise and enhances sonic purity.

Among its technological innovations, the NAD T 743 utilizes advanced digital signal processing, allowing for the fine-tuning of audio parameters and the creation of customized listening profiles. This flexibility is complemented by its ability to decode high-resolution audio formats, ensuring that music lovers can enjoy the full benefits of their digital collections.

In summary, the NAD T 743 is a versatile and powerful home theater receiver that excels in delivering an immersive audio experience. Its combination of robust amplification, support for various audio formats, and user-friendly design makes it an attractive choice for anyone looking to elevate their home entertainment system. With NAD's longstanding reputation for quality and performance, the T 743 stands as a solid candidate for modern audio and video setups.