SPECIFICATIONS
1. INPUT SECTION
Input | Connector | Input Impedance | Max Level |
MONO CH MIC | XLR BALANCED | 3.5K Ω | |
MONO CH LINE | 1/4” TRS BALANCED | 30KΩ | +11dBv |
AUX RETURNS | 1/4” TS BALANCED | 15KΩ | +10dBv |
TAPE IN | RCA JACKS | 15KΩ | +10dBv |
2. OUTPUT SECTION
Output | Connector | Output Impedance | Max Level | |
AUX SEND | 1/4” UNBALANCED | 100 | Ω | +7dBv |
TAPE OUT | RCA JACKS | 1K | Ω | +22dBv |
3. MIXER SECTION
Frequency Response | 30Hz~18KHz |
THD | 0.12% |
S/N RATIO | |
NOISE FLOOR | 0.25mV |
HIGH EQ ±15dB | 12KHz |
MID EQ ±15dB | 2KHz |
LOW EQ ±15dB | 90Hz |
4. POWER AMP SECTION
POWER OUT |
|
8Ω BOTH CHANNELS DRIVEN | ................................................................................................................................................ 105W RMS per side |
4Ω BOTH CHANNELS DRIVEN | ................................................................................................................................................ 125W RMS per side |
FREQUENCY RESPONSE | <10Hz~20KHz |
5. GENERAL
POWER REQUIREMENTS | Voltage selectable, 115VAC/60Hz or 230VAC /50Hz |
FUSE REQUIREMENTS | 5A 250V FB @ 115VAC; 2.5A 250V FB @ 230VAC |
WEIGHT | 18.65 lbs. (8.6 Kg) |
DIMENSIONS | 17.4” x 10.5” x 10.3” (44.2 cm x 26.7 cm x 26.2 cm) |
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice.
10
