FIRE PROTECTION
(Applicable only where local ordinance permits use of this alarm control panel for fire protection).
Fire-Zone Alarm
If a fire is detected, the FIRE icon will flash with the zone number and the keypad sounder will pulse.
•If a fire is in progress, evacuate the premises immediately! If necessary, call the Fire Department from an outside phone.
•If there is no evidence of a fire, enter your code and press Uto silence the alarm.
•Check the smoke detector(s). If a smoke detector tripped, its red alarm indicator light will be on.
•After the alarm condition is corrected (thermostat cooled down; smoke cleared from detector; etc.), pressing Cagain will reset the keypad within about 10 seconds.
|
|
|
|
|
|
|
|
|
|
RESET |
|
|
|
|
| TROUBLE | • The system is constantly monitoring the Fire Zone(s) to insure they are in good | ||
|
|
|
|
|
|
| |||
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
| working order. |
|
|
|
|
|
|
|
|
| |
•If a problem on a Fire Zone is detected, a system trouble E41 will display, followed by the number of the Fire Zone in trouble. The sounder will activate, the RESET and TROUBLE icon will appear.
•Press the Cbutton to silence the sounder. Call for service immediately!
Note: Trouble Error Code E41 will only display for the
P816 control panels.
11
