GLOSSARY
Following are brief descriptions of terms and features used herein that may be unfamiliar to you. Some of the features are programmable options that may or may not apply to your particular system.
Abort Delay - A delay period that allows the control panel to be reset, thus aborting a report to a central station.
Access Code - A code (up to 6 digits) used to remotely unlock a door.
Ambush Code - Either (1) a
Area - Some systems may be divided, or partitioned, into smaller independent subsystems, which are referred to as Areas. Each Area may be controlled by its own keypad or by a keypad of a different Area through Managers Mode.
Arming/Disarming - Turning the system on or off, as follows:
Arming=Code + Por Q;
Disarming=Code + U.
Arming Stay - Arming with interior zones bypassed, allowing free move- ment within the premises.
Arming Away - Arming with ALL zones protected.
Battery - Backup power source in the
BYPASS Button - Enables you to manually remove one or more protective zones from the system.
Central Station - Monitors incoming reports and emergency messages from a digital
communicator and notifies the proper authorities.
Chime - A keypad beep while disarmed alerting that the programmed zone has been opened.
Closing Window - (Optional.) A time interval within which closing (arming) is permitted without reporting to the central station.
Communicator - Reports intrusions, emergencies, openings, closings, etc. directly to the central station over telephone lines.
Control Panel - The brain of the system, it controls all system functions.
Easy Arming - (1) Quick arming in Stay mode (hold down P). (2)
Quick arming in Away mode (hold down Q).
24
