Special Functions
By pressing A followed by the the appropriate key, (do not press simultaneously) these special functions and features can be enabled:
Easy Arm (when system is disarmed)
The Easy Arm feature allows the system to be armed by pressing followed by. This will allow the easy
arming of the system by someone who is not a regular system user.
Easy Exit (when system is armed)
This function (if programmed) allows an occupant to leave the premises without disarming the system. Pressing
followed by while the system is armed will
start a 3 minute period, during which you can leave through the Exit/ Entry door.
Bell / Battery Test
Pressingfollowed by will cause the bell, or
siren to sound for 2 seconds. This will also initiate a test of your battery to make sure it is adequately charged. The P400 also performs an automatic battery test very 24 hours
Access Output
If programmed, pressing followed by will
activate the Access Output which may be configured to open a door strike, turn on lighting, or activate some other special feature your installer has provided.
Display System Trouble
Pressing followed by when TROUBLE
is lit will cause the system to display any current system troubles. Pressing will exit the Display System
Trouble Mode.
Chime Mode On / Off
Pressingfollowed by will activate / deactivate
the door chime. Activating this feature will cause any door to beep the keypad sounder when it is opened.
Program Mode
Pressingfollowed by will enable the “Program
Mode”, which will allow you to program and erase user codes. (see Programming user codes, page 14)
Keypad Sounder On / Off
Pressingfollowed bywill deactivate / activate
the keypad sounder, depending on its present state. By deactivating the sounder on a keypad installed in a bedroom, for example, you will only turn off that keypad’s sounder.
All other keypads on the system will still sound normally.
10
Oi230a | Tuesday, September 16, 1997 08:26 |
page 10 |
|
