Software Installation and Configuration Chapter 3
GPIB-ENET for Macintosh 3-6 © National Instruments Corp.
Configure the Software (Optional)The default settings for the NI-488.2 software work for most applications and devices.
However, you might want to change a device name or primary address. Also, if more
than one GPIB interface or external box is installed, you might want to associate a device
with a particular interface.
You can examine and adjust the configuration of the software using the NI-488
Config control panel utility. For information on running the configuration utility and
for information about the configurable software parameters, refer to Chapter 6, GPIB
Configuration Utility, in the NI-488.2 User Manual for Macintosh.