© National Instruments Corporation 2-1 PCMCIA Serial for Windows Me/9x
2
Installation and Verification
This chapter describes how to install the NI-Serial software, serial
hardware, and cables, and how to verify the installation.

Install the Software

Install the NI-Serial software for Windows Me/9x before you install the
hardware:
1. Select Start»Settings»Control Panel.
2. Double-click on the Add/Remove Programs icon in the Control Panel
to launch the Add/Remove Programs applet. A dialog box similar to
the one in Figure 2-1 appears.
Figure 2-1. Add/Remove Programs Properties Dialog Box