
11 cFP-20xx Quick Start Guide
©
National Instruments Corporation
C. Click the ++sign next to IIAA SSeerrvveerr
wwiitthh OOPPCCin the left pane to expand
the view. Right-click FFiieellddPPooiinnttand
select AAdddd aa ccoommmm rreessoouurrccee ttoo
tthhiiss sseerrvveerr. The Comm Resource
Configuration dialog box appears.
D. Set the Type to EEtthheerrnneett, as shown
in the following figure. Each Ethernet
comm resource represents a single
FieldPoint network module on
the network.
E. Click BBrroowwsseeto launch Remote
System Explorer. Remote System
Explorer searches for any cFP-20
xx
or
other National Instruments Ethernet
devices on the subnet.
F. Double-click the serial number of the cFP-20
xx
you want to configure. Alternatively, you can
right-click the controller and choose CCoonnffiigguurree DDeevviiccee.