National Instruments cFP-20xx Mounting the Backplane on a DIN Rail

2

cFP-20xx Quick Start Guide ni.com

Mounting the Backplane on a DIN Rail

A. Fasten the DIN rail clip(s) to the cFP-BP-

x

using a number 2 Phillips screwdriver and the

8-32 ×5/16 in. countersink screws shipped with the clip(s).

B. Insert one edge of the DIN rail into the deeper opening of the

DINrail clip.

C. Press down firmly on the backplane to compress the spring

until the clip locks in place on the DIN rail.

D. Connect the PE ground terminal on the cFP-BP-

x

to safety ground.

CCAAUUTTIIOONN Do not use screws longer than 5/16 in. to fasten the DIN rail clip to the

backplane.

NA

TIONAL

INSTRUMENTS

NA

TIONAL

INSTRUMENTS

CCAAUUTTIIOONN Disconnect power before removing the backplane from the DIN rail.

Contents

Main FieldPoint xx cFP-20 Quick Start Guide What You Need to Get Set Up Mounting the Backplane on a DIN Rail Mounting the Backplane on a Panel Mounting the Backplane in a Standard 19-in. Rack IInnssttaallll tthhee ccFFPP--2200 CCoonnttrroolllleerr oonn tthhee BBaacckkppllaannee Page IInnssttaallll CCoonnnneeccttoorr BBlloocckkss oonn tthhee BBaacckkppllaannee CCoonnnneecctt tthhee ccFFPP--2200 ttoo YYoouurr NNeettwwoorrkk WWiirree PPoowweerr ttoo tthhee CCoommppaacctt FFiieellddPPooiinntt SSyysstteemm PPoowweerriinngg UUpp tthhee ccFFPP--2200xxxx xx, cFP-20xxand cFP-BP-x User Manual. IInnssttaallll SSooffttwwaarree oonn tthhee HHoosstt PPCC CCoonnffiigguurree tthhee ccFFPP--2200 iinn FFiieellddPPooiinntt EExxpplloorreerr Page Page Page FFiinnddiinngg aanndd CCoonnffiigguurriinngg DDeevviicceess aanndd CChhaannnneellss Page Page Page SSaavviinngg HHaarrddwwaarree CCoonnffiigguurraattiioonn aass PPoowweerr--UUpp SSttaattee ni.com *323334A-01* 323334A-01 Oct02