MID-7654/7652Servo Power Motor Drive User Guide 8 ni.com
Front Panel DIP Switch Settings
The MID-7654/7652 front panel has a detachable metal plate that, when
removed,provides access to one 4-position DIP switch bank and either four
(MID-7654) or two (MID-7652) 9-position DIP switch banks. Refer to
Figure 1 for the location of these switches.
Use the DIP switches on the 4-position DIP switch bank to configure the
inhibit in, inhibit out, and limit status LED polarity as shown in Figure 2.
The differentsettings for these switches are described in the following
sections.
Figure2. 4-PositionDIP Switch Bank Layout
Usethe DIP switches on each 9-position DIP switch bank to configure the
continuous current limit, the peak current limit, and the motor inductance
(lowor standard) for each axis, as shown in Figure 3. The different settings
for these switches are described in the followingsecti ons.
Figure3. 9-PositionDIP Switch Bank Layout
1 Inhibit In Polarity Switch
2 Inhibit Out Polarity Switch
3 Limit Status LED Polarity Switch
4 Reserved
1 Continuous Current Limit Switches
2 Peak Current Limit Switches
3 Motor Inductance Switch
1234
O
N
1 2 3 4
123456789
O
N
1 2 3