National Instruments NI 781xR Safety, Electromagnetic Compatibility, CE Compliance, Waste Electrical and Electronic Equipment (WEEE)

Appendix A Specifications

Safety

The NI78 1xR is designed to meet the requirements of the following

standards of safety for electrical equipment for measurement, control,

andlaboratory use:

• IEC 61010-1, EN 61010-1

• UL 61010-1, CAN/CSA-C22.2 No. 61010-1

Note Refer to the product label, or visit ni.com/certification, search by model

number or product line, and click the appropriate link in the Certification column for UL

and other safety certifications.

Electromagnetic Compatibility

The NI78 1xR is designed to meet the requirements of the following

standards of EMC for electrical equipment for measurement, control,

andlaboratory use:

• EN61326 EMC requirements; Minimum Immunity

• EN55011 Emissions; Group 1, Class A

• CE, C-Tick, ICES, andFCC Part 15 Emissions; Class A

Note For EMC compliance, operate this device with shielded cabling.

CE Compliance

This product meets the essential requirements of applicable European

Directives, as amended for CE marking, as follows:

• 73/23/EEC; Low-Voltage Directive (safety)

• 89/336/EEC; Electromagnetic Compatibility Directive (EMC)

Note Refer to the Declaration of Conformity (DoC) for this product for any additional

regulatory compliance information. To obtain the DoC for this product, visit

ni.com/certification, search by model number or product line, and click the

appropriate link in the Certification column.

Waste Electrical and Electronic Equipment (WEEE)

EU Customers At the end of their life cycle, all products must be sent to a WEEE recycling

center. For more information about WEEE recycling centers and National Instruments

WEEE initiatives, visit ni.com/environment/weee.htm.