Chapter 2 Installation and Configuration
NI PXI-8104 User Manual 2-12 ni.com
c:\images\manuals and list the contents of that directory. You will see
several files, one corresponding to each device.
The os directory contains a subdirectory corresponding to the operating
system installed on your controller.
The rest of the directories correspond to each device in yourcontroller.
Within each of these directories are the drivers for the devices. These files
and directories are copied exactly from the manufacturer distribution disks,
so the naming conventions vary from device to device.
PXI Features

PXI Trigger Connectivity

The SMB connector on the NI PXI-8104 front panel can connect to or from
any PXI backplane trigger line. A trigger allocation process is needed to
prevent two resources from connecting to the same trigger line, resulting in
the trigger being double-driven and possibly damaging the hardware. At
the time of this manual’s publication, this software is not yet available for
Windows. Contact National Instruments for more information.
Chassis Configuration
Configuration of the PXI system is handled through Measurement &
Automation Explorer (MAX), included with the software pre-installed
on your controller. MAX creates the pxisys.ini file, which defines
the layout and parameters of your PXI system.
The configuration steps for single or multiple-chassis systems are the same.
An example of a multichassis configuration is shown in Figure2- 4.