Chapter 3 I/O Information
NI PXI-8183 User Manual 3-10 ni.com
Trig ger
The TRG connector is the software-controlled trigger connection for
routing PXI triggers to or from the backplane trigger bus.
Figure 3-8 shows the TRG connector location on the NI PXI-8183.
Table3-8 lists and describes the trigger connector signals.
Figure 3-8. TRG Connector Location and Pinout
Table 3-8. TRG Connector Signals
Pin Signal Name Signal Description
1TRIG Trigger
2 (Shield) GND Ground
12
NI PXI-8183
Embedded Controller