Chapter 1 Installing and Configuring the SCXI-1127/1128
SCXI-1127/1128 User Manual 1-4 ni.com
Installing the SCXI-1127/1128 Module into the SCXI Chassis
You need the following items to complete the installation:
•SCXI-1127/1128
•SCXI chassis
•1/8 in. flathead screwdriver
Figure 1-1. Installing the SCXI-1127/1128 into an SCXI Chassis
Follow these steps to install your SCXI-1127/1128 module into the SCXI
chassis while referring to Figure 1-1.
1. Turn off the computer that contains the DAQ/DMM device or
disconnect it from your SCXI chassis.
2. Turn off the SCXI chassis. Do not insert the SCXI-1127/1128 module
into a chassis that is turned on.
3. Insert the SCXI-1127/1128 module into the rightmost slot . Gently
guide the module into the module guides and push it to the back of the
slot until the connectors make good contact. The module must be
firmly engaged; however do not force the module into place.
1 AB0+
2 AB0–
3 NI 4060 for PCI
4 AB2+
5AB2–
6 HV8-BAN4
7SH9MD-9MD
8 2-Slot HVAB-Backplane Adapter
9 SCXI Chassis
10 SCXI-1127/1128 Module
8
2
3
4
5
6
7
9
10
1