© National Instruments Corporation B-1 VXI-1394 User Manual for Windows
B

Default Settings

This appendix summarizes the default settings for the hardware and
software in the VXI-1394 kit. If you need more information about a
particular setting, or if you want to try a different configuration, refer
toA ppendix C, Advanced Hardware Configuration Settings, for your
hardware reference and to the MAX online help for your software
reference.
Note There are no hardware settings on the PCI-1394 board.

Hardware Settings

Table B-1. VXI-1394 Hardware Default Settings
Hardware Component Default Setting
W1—VXIbus Slot 0/Non-Slot 0 Automatic detection
S6—VXIbus CLK10 source From onboard oscillator
S5—External trigger termination OFF: unterminated
S3—SMB CLK10 direction IN: receive CLK10 signal
S2—SMB CLK10 termination OFF: ignored
S4—Polarity of external SMB
CLK10
Inverted
S7—Configuration EEPROM Do not load from factory setting