National Instruments VXI-MIO Series , Organization of This Manual

About
This
Manual
 National Instruments Corporation xi VXI-MIO Series User Manual
This manual describes the electrical and mechanical aspects of each
module in the VXI-MIO Series product line and contains information
concerning their installation, operation, and programming. Unless
otherwise noted, text applies to all modules in the VXI-MIO Series.
The VXI-MIO Series includes the following modules:
• VXI-MIO-64E-1
• VXI-MIO-64XE-10
The VXI-MIO Series modules are high-performance multifunction
analog, digital, and timing I/O modules for VXIbus.
Organization of This Manual
The VXI-MIO Series User Manual is organized as follows:
• Chapter 1, Introduction , describes the VXI-MIO Series modules,
lists what you need to get started, describes the optional software
and optional equipment, and explains how to unpack your
VXI-MIO Series module.
• Chapter 2, Configuration and Installation , explains how to
configure and install your VXI-MIO Series module.
• Chapter 3, Hardware Overview , presents an overview of the
hardware functions on your VXI-MIO Series module.
• Chapter 4, Signal Connections , describes how to make input and
output signal connections to your VXI-MIO Series module via the
module I/O connector.
• Chapter 5, Calibration, discusses the calibration procedures for
your VXI-MIO Series module.
• Appendix A, Specifications , lists the specifications for each
module in the VXI-MIO Series.
• Appendix B, Optional Cable Connector Descriptions , describes the
connectors on the optional cables for the VXI-MIO Series modules.
About
This
Manual