NCR 7156 manual Turning On the Printer, Standard Operator Panel

Chapter 2: Setting Up and Using the Printer 7156 Setup and User’s Guide

Turning On the Printer

On Line Button

On Line

Green LED

Paper Status

Red LED

Paper Feed Button

Standard

Operator Panel

On Line Button with Recessed Plunger

On Line

Green LED

Paper Status Red LED

Paper Feed Button

Alternate Version

Operator Panel

Note: The operator panel may differ from the standard version (left) depending on the model. On models matching the alternate version (right), use a paper clip or pointed object to press the plunger to put the printer on- or off-line.

1.Press the On Line button (or plunger) to put the printer on-line, if it’s not already on-line.

The printer goes through a self-test routine to ensure everything is working properly then “beeps.” The On Line light (green) comes on indicating the printer is on-line. When the printer has completed its “startup” cycle, it is ready to receive data.

If the On Line light does not come on, the Paper Out light or the LED on the slip table flashes, or the host computer indicates that there is a problem, see the 7156 Owner's Guide for more information.

2.Press the On Line button (or plunger) again to put the printer off-line.

Note: The printer receives power when the power supply is on even if the printer is off-line. To completely remove power, press the On Line button (or plunger) to put the printer off-line (On Line light is off), then unplug the power supply from the outlet.

12 September 1998