7156 Setup and User’s Guide

Chapter 2: Setting Up and Using the Printer

Putting In the Paper Roll

Note: Tear off the end of the new roll so that the edge is loose.

1.Place the new roll in the bin with a little extra paper extending over the front. Be sure the paper unrolls from the bottom of the roll. Otherwise the paper will not be printed on because the thermal coating will be on the wrong side.

2.Close the receipt cover.

3.Remove the excess paper by tearing it against the tear-off blade.

In addition to the tear off-blade, some printers use a knife to cut the receipt.

1

2

 

3

September 1998

15

Page 21
Image 21
NCR 7156 manual Putting In the Paper Roll