NCR 7156 manual Loading and Changing the Receipt Paper

7156 Setup and User’s Guide Chapter 2: Setting Up and Using the Printer

Loading and Changing the Receipt Paper

Although the illustrations show a used roll being removed, the instructions apply to loading paper for the first time.

Change the paper when either of the following two conditions occurs:

￿Paper Status LED (red) flashes: the paper is low

There are approximately 1 ½ to 7 ½ meters (5-25 feet) of paper remaining on the roll. Change the paper as soon as possible to avoid running out part way through a transaction.

Depending on the application program, the host computer may alert you when the paper is low.

￿Paper Status LED (red) turns on: the paper is out Change the paper immediately or data may be lost.

Caution: Do not operate the printer or host computer if the printer runs out of paper. The printer will not operate without paper, but it may continue to accept data from the host computer. Because the printer cannot print any transactions, the data may be lost.

September 1998 13