Roamer User Guide
Making Changes without a Permanently Assigned Telephone
Set a Home Telephone
This set of procedures is designed for those individuals who do not have assigned home telephones. Individuals without a permanently assigned phone must have access to phones, depending upon their current location. You can temporarily set a home telephone and periodically relocate from it to other locations, or you can reset your home telephone to different locations.
If you do not have a home telephone number assigned to you, you can make any appropriately equipped telephone in the system your home using this procedure. Press the Roamer function key on the selected telephone to display the first message:
Displayed Message | Expected Response | Result |
1. “YOUR ID?” | Enter your ID number | One of the following occurs: |
| followed by a #. | • If you do not already have a |
|
| |
| Note: If the ID you en- | home telephone, you are |
| assigned to this telephone. | |
| tered is not valid, | |
| (2a) | |
| the message “IN- | |
| • Roamer recognizes that this | |
| VALID ID” dis- | |
| plays. Press # and | telephone is already |
| begin again. | temporarily assigned as |
|
| your home. (2b) |
|
|
|
2a. “HOME SET” | Press #. | This telephone is now your |
|
| home. Your incoming calls will |
|
| come to it, and you can make |
|
| outgoing calls from it |
|
| according to your own |
|
| privileges and restrictions. |
|
|
|
2b. “STILL HERE” | Press #. | Your privilege level is |
|
| confirmed on this telephone. |
Note: If you want to exit from Roamer, press the Roamer function key a second time.
Page 4 |
