External Speaker Connections
EXT SPEAKER R |
|
+ – |
|
AUDIO | |
– + |
|
L | VIDEO |
MONO | |
R | IN |
| |
L | DVD/HD |
| |
R | IN |
| |
L | RGB |
MONO | |
R | IN |
| |
L | AUDIO |
| |
R | OUT |
| |
(VARIABLE) | |
REMOTE | |
CONTROL | |
EXT SPEAKER L
–+
VIDEO
VIDEO IN | – + |
|
DVD/HD
Y/Y
CB/PB
CR/PR
RGB
RGB IN
EXTERNAL
CONTROL
External speakers may be connected to the PlasmaSync 4200W to reproduce sound from VIDEO, DVD or RGB signal sources.
External speakers may be connected directly to the SPEAKERS terminals or indirectly by connecting a stereo system amplifier to the audio outputs.
CAUTION: Unplug the PlasmaSync 4200W and all connected components before connecting external speakers. Use only speakers with
To connect external speakers directly to the PlasmaSync 4200W:
1.Strip the ends of the speaker wires.
2.Press down the tabs below the SPEAKERS terminals, insert the speaker wire and release the tab to secure the speaker wire connection:
[a] Connect the right speaker (located at right side of the monitor when viewed from the front) positive (+) wire to RIGHT +.
[b]Connect the right speaker negative
[c]Connect the left speaker negative
[d]Connect the left speaker positive wire (+) to LEFT+.
10