Setting the appropriate screen size for the computer image
This function switches the screen to the appropriate size when 852 dot2480 line signals are input.
Example: Setting the “WIDE RGB” mode to “ON”
Press the MENU button on the remote controller to dis-
play the MAIN MENU on the screen, then...
1.Use the up and down buttons to select “FUNCTION”, then press the “OK” button.
The “FUNCTION” screen appears.
2.Use the ▲ and ▼ buttons to select “WIDE RGB”.
F U N C T I O N |
| ||
POWER MGT | : | OFF | |
RGB SELECT | : | RGB | |
WIDE RGB |
| : | AUTO |
OSM | : | ON | |
RESET | SEL. |
RETURN | ADJ. |
| MENU EXIT |
3.To turn the “WIDE RGB” mode on ...
Use the ß and © buttons to select “ON”.
The mode switches as follows each time the ß or © button is pressed:
AUTO ↔ ON
F U N C T I O N |
|
| ||
POWER MGT | : | OFF | ||
RGB SELECT | : | RGB | ||
WIDE RGB |
| : | ON |
|
OSM | : | ON | ||
RESET | SEL. |
RETURN | ADJ. |
| MENU EXIT |
4.Once the setting is completed ...
Press the “MENU” button.
The WIDE RGB mode is turned on, and the menu dis- appears.
Information
mWIDE RGB settingsAUTO ............ | Use this setting when watching normal |
| computer images. Normally set this |
| mode. |
ON ................. | When an 852 dot2480 line signal with |
| a vertical frequency of 60 Hz and a hori- |
| zontal frequency of 31.72 kHz is input, |
| the image may be compressed horizon- |
| tally. To prevent this, set WIDE RGB |
| to ON. |
*“IBM PC/AT” and “VGA” are registered trademarks of IBM, Inc. of the United States.
30