NEC 42MP2 Setting the color temperature, mSetting the color temperature, Restoring the factory default settings, mRestoring the factory default settings

Setting the color temperature

Use this procedure to set color tone produced by the plasma display.

Example: Setting "1"

Press the PROCEED button on the remote controller to

display the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “PICTURE”, then press the “PROCEED” button.

The “PICTURE” screen appears.

2.Use the ▲ and ▼ buttons to select “COLOR TEMP.”.

P I C T U R E

CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT		R				G
PICTURE MODE		:		MEMORY
COLOR TEMP.		:	2
NR		: NR-2
SEL.	ADJ.				RETURN
				EXIT

3.Use the § and © buttons to select "1".

The mode switches as follows when the § and © buttons are pressed:

→ 1 ↔ 2 ↔ 3 ↔ PRO ←

* See page 21 to set "PRO".

5.Once the setting is completed...

Press the “EXIT” button to return to the main menu. To delete the main menu, press the “EXIT” button once more.

Information

mSetting the color temperature

1 .........................	High (bluer)
2 .........................	Middle (Standard)
3 .........................	Low (redder)

mRestoring the factory default settings

Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.

COLOR TEMP. : 1

If neither the § or © button is pressed within 5 seconds, the current selection is set and the previous screen reppears.

4.Press the “PROCEED” button. The “COLOR TEMP.” is set to “1”.

P I C T U R E

CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT		R				G
PICTURE MODE		:		MEMORY
COLOR TEMP.		:	1
NR		: NR-2
SEL.	ADJ.				RETURN
				EXIT

20