4-30
Installing the Printer Driver
Under Windows NT4.0
Printer Driver Chapter 4
Important!
10. In Name or address of host providing lpd, type in the printer
IP address that was assigned when the network interface card was
installed. In Name of printer on that machine, type in PORT1.
• You will not be able to select LPR Port unless the following two settings
are in effect in the Control Panel Network applet.
• Protocol: TCP/IP Protocol
• Services: TCP/IP Print
• If you have a problem selecting LPR Port, change these settings as
shown above.
PageWorks.book Page 30 Tuesday, April 21, 1998 3:55 PM