![](/images/new-backgrounds/1033078/3307881x1.webp)
Registration Code
Registering the
Handset to the
DECT System
Selecting the DECT System
20 Menu: System
The handset can be operated with a maximum of 10 DECT systems. Before you can make a call via the DECT system, the handset has to be registered to the respective system. A sys- tem ID and registration code may be necessary for the registra- tion process. Ask the respective system administrator for the valid registration code. When the handset is not yet subscribed to the system the display is showing ”No subscription”.
All settings in this chapter are started by pressing the softkeys:
Menu System OK
Then select…
Subscription OK Options New / OK F PARK
OK F PIN (Authentication code) OK F System name OK
FLocal phone number OK
The following entries must be made when logging on:
Enter PARK | : a system ID should only be entered |
| if you are at a location where two |
| DECT systems overlap. If only one |
| DECT system is available, then just |
| press OK. |
| : this code is used to register the |
Enter Auth.Code | |
| handset (authentication code). The |
| DECT System supplies this code. |
Enter System Name | : give the name of the DECT system |
| to which you are registering. This |
| will be shown on the idle display. |
| For information concerning the |
| entry of characters, refer to ”Enter- |
| ing Characters / Names”. |
| : the phone number, assigned to |
Enter Local Number | |
| your DECT handset can be entered |
| here (ask your system administra- |
| tor for the phone number). |
Subscription OK select a System Options
Select OK
If the handset has been registered to several DECT systems, then you can select which one the handset is to use. Select the system via the arrow keys before confirming ”Select”. By choosing Options Select , the function automatic search is disabled. The selected system is shown in the idle display.
39