Motor Control I/O Board User’s Manual
Figure 11. Debugging Environment Shown with QB-78K0MINI On-Chip Debugger
Note: The on-chip debugger has a 5 MHz internal clock source by default.
The MC-78F0714 must be operated at 20 MHz. Use the external 20 MHz oscillator supplied with the kit. Consult the on-chip debugger user’s manual for information about how to attach the external oscillator.
The sample program “BLDC-Hall-714-LV 120-degree Trapezoidal Drive” is installed in step (b) of the “Install Software” section in \Motor_Control\BLDC_Hall_714 folder. The sample code includes a workspace and project files used with Project Manager Plus, which is NEC Electronics’ integrated development environment software.
To recompile and debug the sample program follow the steps below:
1. Run PM Plus program installed by the NEC Electronics assembler software.
2. Launch PM Plus from Start Programs NEC Tools32.3. PM Plus will display its main window as shown below.
9
