Motor Control I/O Board User’s Manual

10. GUI Operation

To operate the motor from the PC GUI, the code has to be rebuilt with “GUI” option. Select Compiler Options from PM+ Tool menu and type “GUI” in Preprocessor Define Macro entry.

Figure 15. Compiler Options for PC GUI Operation

Rebuild and download the code to the microcontroller flash. At this point the motor can be controlled from the GUI only.

Connect the PC serial port to the starter kit J9 DB-9 RS232 connector with the serial cable supplied and launch the communication program Motor Panel, click Start Programs NEC Tools32 Motor Panel GUI

1. Select the appropriate COM port your PC and click OK.

Figure 16. PC COM Port Selection

12