Turn on the projector first and then the signal sources.
If you connect multiple sources at the same time, use the “SOURCE” button on the control panel or use “COMP.”, “VIDEO”, “HDMI”, “SD”, “USB-A”, “USB-B” on the remote control to switch inputs.
, , , or button on the remote control. Select your language. Refer to Language on page 28.
3. Turn on the projector by pressing “POWER” on the remote control or on the control panel. The Power indicator will flash blue. The startup screen (NEC logo) will be dis- played. and the Power indicator will turn steady blue.
When you first turn on the projector, you will get the Startup menu. This menu gives you the opportu-
nity to select the menu 4. Turn on your source (computer, notebook, video player,etc.) languages. To select the The projector will detect your source automatically. language, use the
2. Ensure that the power cord and signal cable are securely connected. The Power indicator will turn red.
Installation
Powering On/Off the Projector
Powering On the Projector
1. Slide the lens cover.
1Lens Cover
2POWER
or
English ... 14