In some cases the POWER indicator can stay light for a certain period of
time after the power cord is unplugged.
After Use
When storing the projector in the supplied soft case, insert the projector with the top cabinet facing upward.
The remote control can be stored in the inner pocket inside the soft case.
Lens cover
4. Do not turn on the projector immediately following a power off procedure.
3. Disconnect the power cord from the electrical outlet and the projector.
This is not a fault. Press
the POWER button 2. Press the “POWER” button again to confirm. When the light
again with the power turns red, the projector has entered standby mode. cord unplugged and
the indicator light will go off.
Installation
Powering off the projector
1. Press the “POWER” button on the remote control or the button on the control panel to turn off the projector, you will see a message as below on the on-screen display.
15... English