User Controls

On Screen Display

The Projector has a multilingual On Screen Display (OSD) that allows you to make image adjustments and change a variety of settings. The projector will automatically detect the

source.

When “Advanced”, “Signal”, or “Informa- tion” is selected for the sub menu, you cannot select any item in the main menu.

If no button operation is made for 30 seconds, the OSD will be closed automatically.

How to operate

1.To open the OSD, press the MENU button on the remote control.

2.When OSD is displayed, use the buttons to select any item in the main menu. While making a selection on a particular page, press the button to enter sub menu.

3.Use the buttons to select the desired item in the sub menu and adjust the settings by using the or button.

4.If the setting has icon, you could press the ENTER button to enter another sub menu. Press the MENU button to close the sub menu after adjustment.

5.After adjusting the settings, press the MENU button to go back to the main menu.

6.To exit, press the MENU button again. The OSD will be closed and the projector will automatically save the new settings.

Main Menu

Sub Menu

Setting

19... English