Controls

E - 18

VIDEO DETECT

Selects the method of video detection when two computers are connected.

NONE

The monitor will not switch the video inputs automatically, only by user control.

FIRST DETECT

The video input has to be switched to “FIRST DETECT” mode. When current video input signal is not present, then the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the new found video source automatically. The monitor will not look for other video signals while the current video source is present.

LAST DETECT

The video input has to be switched to the “LAST DE- TECT” mode. When the monitor is displaying a signal from the current source and a new secondary source is supplied to the monitor, then the monitor will automati- cally switch to the new video source. When current video input signal is not present, then the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the new found video source automatically.

DVI SELECTION

This function is selected the DVI input mode. When the DVI selection has been changed, you must restart your computer.

DIGITAL

DVI digital input is available.

ANALOG

DVI analog input is available.

SOUND

Adjusts the volume of the earphones jack.

English

Deutsch

Français

Español

Italiano

Appendix

CN912B-2/LCD1810X/78135322

33

00.5.26, 0:04 PM

Page 33
Image 33
NEC LCD1810X user manual Video Detect