Tilt
Grasp both sides of the monitor screen with your hands and adjust the tilt as desired
(Figure TS.1). | Figure TS.1 |
|
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1. Remove the connector cover, hinge cover and cable cover. (Figure R.1)
2. | Disconnect all cables. | Push | Push | |
3. Place monitor face down | ||||
|
| |||
| on a |
|
| |
| surface. |
|
| |
| (Place the screen on a |
|
| |
| 32 mm platform so that |
|
| |
| hole of stand match to |
|
| |
| screw location) |
|
| |
| (Figure R.2). | Figure R.1 |
| |
4. Remove the 4 srcews connecting the monitor to the stand and lift off the stand assembly (Figure R.2) the monitor is now ready for mounting in an alternate manner.
5. Connect the AC cord and signal cable to the back of the monitor.
English
6.Reverse this process to reattach stand.
Caution:To fulfil the safety requirements the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g. GS mark).
Screws |
