![Re-establishing Wi-Fi connection](/images/new-backgrounds/20150/2015057x1.webp)
3Press 3 or 4 and 2 to select Firmware
4Press 3 or 4 and 2 to select Restore firmware
5Press 3 or 4 and 2 to select Yes.
Re-establishing Wi-Fi connection
After upgrading or restoring the Center’s firmware, you need to
On Center,
●Select HD mode and then, enter Installation Mode by:
a.Press and hold STOP • MENU (or on remote control, press MENU)
b.Use the navigation controls 3 or 4 and 2 to enter Station Mgnt menu
c.In Station Mgnt menu, use the navigation controls 3 or 4 and 2 to select Add New
Station
➜ Searching for Stations starts
On the Stations,
●Enter Installation Mode by:
a.Remove the Station’s power plug and then, connect it to the power supply again
➜ “Connecting to Center” appears
b.On the remote control, press MENU to enter the selection screen of Installation Mode and Select Server
c.Use the navigation controls 3 or 4 and 2 to select Installation Mode
On Center,
●Press STOPÇto exit Installation
Mode when Center has found all the stations
HD
English
29