Installation
Rear connections
Warning:
Never make or change connections with the mains supply switched on.
AConnecting to an audio system
You can easily connect your WAC5 to your existing home audio systems, such as the audio/ video receiver, home theatre system, mini/micro system, or multimedia speaker boxes (with built- in amplifier) and audio amplifiers.
Using audio cables, connect one (one set) of WAC5’s sound output terminals: LINE OUT, DIGITAL OUT or OPTICAL OUT to the corresponding input terminals in the connected device. For better sound output, use DIGITAL OUT or OPTICAL OUT if it is available on the connected device.
LINE OUT:
1 Connect Center to an audio system:
a.Insert the red plug of the red/white audio cables (supplied) to the red socket LINE OUT R and the white plug to the white socket LINE OUT L
b.Connect the other end of the audio cables to the AUX IN (or AUDIO IN) terminals of the additional appliance, red plug to the red socket AUX IN R and white plug to the white socket AUX IN L
OPTICAL OUT
DIGITAL OUT
(for illustration only)
2Select AUX mode in the connected audio system
DIGITAL OUT:
1Insert the plug of digital audio cables (not supplied) to the DIGITAL OUT socket
2Connect the other end of the audio cables to the DIGITAL IN terminal of an additional appliance
OPTICAL OUT
DIGITAL OUT
3Select the Digital Input mode (such as DI) in the connected audio system.
Helpful hints:
– Always refer to the owner’s manual of other equipment for details.
OPTICAL OUT:
1Insert the plug of optical audio cables (not supplied) to the OPTICAL OUT socket
2Connect the other end of the audio cables to the OPTICAL IN terminal of the additional appliance.
OPTICAL OUT
DIGITAL OUT
3Select the optical input mode in the connected audio system.
Helpful hints:
– Always refer to the owner’s manual of other equipment for details.
English
15