Basic functions
Switching to standby/on and selecting functions
1When the set is on, press
➜Display shows GoodBye
➜The Red indicator lights up
➜The screen dims out. Display shows Station Status screen and the number of stations found
2To switch on, press
➜The set switches to the last source selected
➜The Green indicator lights up
●You can also switch on the set by pressing the source button on Center’s remote control (e.g. HARDDISK,
3To select Center’s function, press SOURCE once or more on the set (or HARDDISK, CD/
Switching to power-saving mode
In the
1When the set is on, press and hold STANDBY- ON/ ECO POWER to switch it to Eco power (or y on the remote control).
➜The display is switched off
➜The Red indicator lights up
2To switch on, press and hold
➜ The set switches to the last source selected
Helpful hints:
–In the standby/Eco power mode, the settings of networking, display and language will be retained in the set’s memory.
–To protect the hard disk, always switch Center to standby/ECO POWER before removing its power plug from the wall outlet.
English
ECO
POWER
Auto-standby
●When the set has reached the end of playback/ recording and remains in the stop position for
more than 5 minutes, the set will switch to standby automatically to save power.
19