Installation
English
Placing Center and Station
IMPORTANT!
–Install your Center and Station near the AC outlet and where the AC power plug can be reached easily.
Take the following steps to optimize the
–Keep your Center and Station away
from the source of interference (wireless routers, microwave ovens, DECT phones, bluetooth devices, cordless phones, other
–Avoid placing your Center or Station close to the plasma TV. It may result in improper display on your Center’s
–Keep Stations adequately apart or in different angles (e.g. in different rooms blocked by one wall). Within a distance and angle (e.g. in the same room), your Center’s remote control is powerful enough to simultaneously operate several Stations, which may also result in improper display on the
Setting up
Up to 5 stations can be connected to a WAC5 Center.
On Center
1Connect the Center to power supply
2Switch on WAC5 Center and select HD source
3To select Add New Station on Center
a.Press and hold STOP • MENU to enter the MENU screen (or on remote control, press MENU)
b.Use the navigation controls 3 or 4 and 2 to enter Station Mgnt menu
c.In Station Mgnt menu, use the navigation controls 3 or 4 and 2 to select
➜ You will enter the Installation Mode. Searching for the station starts
➜ Playback stops on the previously associated Station if you are playing the HD source
On Station
4Connect the station to power supply
5To select Installation Mode,
a.On the remote Control, press MENU
b.use the navigation controls 3 or 4 and 2 to select
On Center
6Press STOP/Ç on the Center when all your stations are found
IMPORTANT!
–Avoid thick walls. Your Center and Station should never be blocked by 2 or more walls.
–Avoid placing the sets close to large metal objects.
–For better
Station.
– indicates maximum reception
– indicates no reception
If there is interference in the neighborhood, the set may pause during playback or respond slowly to your operation. In such cases
–Use the WEP* key when connecting your Center and Station to an existing wireless PC network. See the manual Connect to your PC: Option 2.
–Change the operating channel of your Center and Station when connecting them to an existing wireless PC network.To learn about how to change channels, see the Owner’s manual of your router and the manual Connect to your PC: Option 2.
–If possible, change the operating channels of the other
–Turn the above devices in different directions to minimize interference.
*stands for Wired Equivalent Privacy. It is a security protocol for wireless local area network
14