Reset
English
Reset
If desired, you can restore your Center or Station to their default setting (including the network setting).
When to reset Center or Station:
●Resetting Center or Station helps to
●To change the way your Center connects to PC, you need to reset the Center (see the Option 1, Option 2 or Option 3 in manual Connect to your PC)
1Check the set is switched on (See Basic functions, Switching on/to standby and selecting functions, Switching to Eco power/ on)
2Press and hold STOP • MENU to enter the MENU screen (or on the remote control, press MENU)
3Use the navigation controls 3 or 4 and 2 to enter Settings
4Use the navigation controls 3 or 4 and 2 to enter Restore settings
5Press 3 or 4 and 2 to select Yes
➜ The set is rebooted. Language selection screen appears
6Select your desired language: English, French,
Spanish, Dutch, Italian and German
➜The set enters Installation Mode
➜The search for Center or Stations starts.The
If the Center is reset and Stations are not reset:
●On the Stations, enter Installation Mode by:
a.Remove the Station’s power plug and then, connect it to the power supply again
➜ “Connecting to Center” appears
b.Press MENU or STOP to enter the selection screen of Installation Mode and Select
Server
c.Use the navigation controls 3 or 4 and 2 to select Installation Mode
If a Station is reset and the Center is not:
●On the Center, select HD mode and then, enter Installation Mode by:
a.Press MENU
b.Use the navigation controls 3 or 4 and 2 to enter Station Mgnt menu
c.In Station Mgnt menu, use the navigation controls 3 or 4 and 2 to select Add New
Station
➜ Searching for Stations starts
If both Center and Stations are reset:
●Do as you did in the
7On Center, press STOPÇto exit Installation Mode when all your Stations are found
34
