Preparation
Using the remote control
IMPORTANT!
–Always point the remote control directly towards IR area on the Center or Station you wish to operate.
–Some functional keys on Center’s remote control are exclusively used for Center (for example,
MARK/UNMARK, MUSIC BROADCAST etc.)
Preparation
Center’s remote control:
1Open the battery compartment.
CAUTION!
–Remove batteries if they are exhausted or will not be used for a long time.
–Do not use old and new or different types of batteries in combination.
–Batteries contain chemical substances, so they should be disposed of properly.
Using Center’s remote control
Battery usage: As a remote control with synchronous display, Center’s remote control consumes more power than normal remote controls. When its batteries are low or empty, the icon 
appears on the remote control’s display. Replace the batteries with new alkaline batteries.
By default, Center’s remote control works with Center only. To operate Station using
Center’s remote control
English
2 | 1 Press and hold REFRESH until the selection |
3 | screen appears on the display of Center’s |
| |
| remote control. |
| 1 |
2Insert 4 batteries type R03 or AAA into the
remote control with the correct polarity as indicated by the "+" and
the battery compartment
2 Press the navigation controls 3 or 4 and 2 to select Station
3 Put back the compartment door
On Center’s remote control:➜ Display shows current status of Station after Station is connected
➜ You can use Center’s remote control to operate Station now.
17
