7
English
Getting Started
1Open the battery compartment.
2Insert two batteries type R06 or AA,
following the indications (+ –) inside the
compartment.
3Close the cover.

Using the remote control

Handling the remote control
• Do not spill water or other liquids on
the remote control.
• Do not drop the remote control.
• Do not leave or store the remote
control in the following types of
conditions:
– high humidity such as near a bath
–high temperature such as near a heater
or stove
– extremely low temperature
– dusty places
1Connect the AC power cord to the power
outlet.
2Turn on the TV and your AV receiver.
3Select the appropriate input source at the
AV receiver that was used to connect to
this unit. Refer to the equipment owner’s
manual for detail.
4Turn this unit on.
5Set the TV to the correct Video IN
channel. (eg. EXT1, EXT2, AV1, AV2,
AUDIO/VIDEO, etc. Refer to your TV
owner’s manual for detail)
➜The front display lights up and the
default screen appears on the TV.
This DVD Player is compatible with both
NTSC and PAL. Select the color system
that matches your TV.
1Press SETUP.
2Press 2 repeatedly to select {VIDEO
SETUP PAGE}.
3Press 34 to highlight {TV TYPE}, then
press 2.
Step1: Inserting batteries into the Remote Control
2
1
3
2
30°
30°
Point the remote control
at the sensor, within
approximately 6 m
(20 feet) of the unit.
Remote control
sensor
Step2: Turning on the powerStep3: Selecting the color system that corresponds to your TV
VIDEO SETUP PAGE
TV TYPE PAL
TV DISPLAY NTSC
PROGRESSIVE MULTI
PICTURE SETTING
COMPONENT