General Information
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).
Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Disposal of your old product
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Maintenance
Cleaning the Set
●Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
● When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out.
●Do not use solvents such as benzene, thinner, commercially
available cleaners, or antistatic spray intended for analog records.
Protecting the hard disk
●Keep your WAC5 Center from violent vibration, which may result in the damage to the hard disk.
English
When this
Please inform yourself about the local separate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old products with your normal household waste.The correct disposal of your old product will help prevent potential negative consequences for the environment and human health.
Safety information
●Place the set on a flat, hard and stable surface.
●Do not expose the system, batteries or discs to excessive moisture, rain, sand or heat sources caused by heating equipment or direct sunlight.
●Place the sets in a location with adequate ventilation to prevent internal heat
●The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers
●The apparatus shall not be exposed to dripping or splashing.
●No objects filled with liquids, such as vases, shall be placed on the apparatus.
●No naked flame sources, such as lighted candles, should be placed on the apparatus.
●The mechanical parts of the set contain self- lubricating bearings and must not be oiled or lubricated.
9
