Installation
English
BConnecting to your PC
●Connect the supplied Ethernet cable to Center’s ETHERNET and your computer’s Ethernet port. For details, see the manual
Connect to your PC
OPTICAL OUT
DIGITAL OUT
CConnecting an additional appliance
It is possible to use an additional appliance, e.g. TV,VCR, Laser Disc player or DVD player with the WAC5 Center. On WAC5 Center, you can playback or record music from an external source.
1Insert the red plug of the red/white audio cables (not supplied) to the red socket AUX IN R and the white plug to the white socket AUX
IN L
2Connect the other end of the audio cables to the AUDIO OUT terminals of the additional appliance
Helpful hints:
–For more information about recording/playback from the external source, see HD: Recording from external source and AUX.
–For better sound output, use the LINE OUT terminals on the external device.
–If the connected device has only a single audio out terminal, connect it to the AUX IN left terminal. Alternatively, you can use a “single to double” cinch cable, but the output sound still remain mono.
–Always refer to the owner’s manual of other equipment for complete connection.
Using AC power
1Make sure all the connections have been made before switching on the power supply
2Connect the AC power cord to the wall socket. This switches on the power supply
When Center is switched to standby, it is still consuming some power. To disconnect the system from the power supply completely, remove the power plug from the wall socket.
The type plate is located on the rear of the set.
For users in the U.K.: please follow the instructions on page 2.
OPTICAL OUT
DIGITAL OUT
3Select AUX mode in Center.
16
