NEC LCD1970GX user manual Button, Menu, Brightness/Contrast Controls

Controls

OSM® (On-Screen Manager) control buttons on the front of the monitor function as follows:

To access OSM menu, press any of the control buttons (MENU/EXIT, Left, Right, Down, Up). To change signal input, press the SELECT button.

To change DV MODE, press the RESET/DV MODE button. NOTE: OSM must be closed in order to change signal input.

Button	Menu
MENU/EXIT	Exits the OSM controls.
	Exits to the OSM main menu.
Left/Right	Moves the highlighted area left/right to select control menus.
	Moves the bar left/right to increase or decrease the adjustment.
Down/Up	Moves the highlighted area down/up to select one of the controls.
SELECT/1 2	Active Auto Adjust function. Enter the OSM sub menu.
RESET/DV MODE	Resets the highlighted control menu to the factory setting.

NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to cancel the RESET function by pressing the MENU/EXIT button.

Brightness/Contrast Controls

BRIGHTNESS

Adjusts the overall image and background screen brightness.

CONTRAST

Adjusts the image brightness in relation to the background.

DV MODE

Allows you to select the suitable setting for Movie, Picture, etc.

AUTO Contrast (Analog input only)

Adjusts the image displayed to optimal settings.

Auto Adjust (Analog input only)

Automatically adjusts the Image Position, H. Size and Fine settings.

Image Controls (Analog input only)

LEFT / RIGHT

Controls Horizontal Image Position within the display area of the LCD.

DOWN / UP

Controls Vertical Image Position within the display area of the LCD.

H.SIZE

Adjusts this setting to increase or decrease the horizontal size.

FINE

Adjusts this setting to improve focus, clarity and image stability.

9

15503781-LCD1970GX(A)-content Page 9 12/24/2004, 5:37 PMAdobe PageMaker 6.5C/PPC