NEC user manual Specifications, Monitor, MultiSync LCD1970VTM

Specifications

Monitor		MultiSync® LCD1970VTM		Notes
Specifications		Monitor
LCD Module	Diagonal :	19.0 inch	Active matrix; thin film transistor (TFT)
	Viewable Image Size :	19.0 inch	liquid crystal display (LCD); 0.294 mm dot
	Native Resolution (Pixel Count) :	1280 x1024	pitch; 250cd/m2 white luminence;
			450:1 contrast ratio, typical
Input Signal	Video :	ANALOG 0.7 Vp-p/75 Ohms
	Sync :	Separate sync. TTL Level
		Horizontal sync. Positive/Negative
		Vertical sync. Positive/Negative
		Composite sync. Positive/Negative

Sync on Green (Video 0.7Vp-p and Sync Negative 0.3Vp-p)

Display Colors		16,777,216		Dependent on display card used.
Maximum	Left/Right :	80°/80°	(CR>5)
Viewing Angles	Up/Down :	80°/80°	(CR>5)
Synchronization	Horizontal :	31.5 kHz to 81.1 kHz		Automatically
Range	Vertical :	56.0 Hz to 75.0 Hz		Automatically
Resolutions Supported		720 x 400*1 :VGA text		Some systems may not support all modes listed.
		640 x 480*1 @ 60 Hz to 75 Hz
		800 x 600*1 @ 56 Hz to 75 Hz
		832 x 624*1 @ 75 Hz
		1024 x 768*1 @ 60 Hz to 75 Hz
		1152 x 870*1 @ 75 Hz
		1280 x 1024 @ 60 Hz to 75 Hz ..........................NEC DISPLAY SOLUTIONS cites
				recommended resolution at 60 Hz for
				optimal display performance.
Active Display Area Horizontal :		376.3 mm/14.8 inches
	Vertical :	301.1 mm/11.9 inches
Power Supply		100 – 240 V~ 50/60 Hz
Current Rating		0.65 – 0.35A
Dimensions		412.5 mm (W) x 386.5-496.5 mm (H) x 220 mm (D)
		16.2 inches (W) x 15.2-19.5 inches (H) x 8.7 inches (D)
Weight		7.6 kg
		16.8 lbs
Environmental Considerations
	Operating Temperature :	5°C to 35°C/41°F to 95°F
	Humidity :	30% to 80%
	Feet :	0 to 10,000 Feet
	Storage Temperature :	-10°C to 60°C/14°F to 140°F
	Humidity :	10% to 85%
	Feet :	0 to 30,000 Feet

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

NOTE: Technical specifications are subject to change without notice.

14