Specifications

Monitor Specifications

 

MultiSync LCD2060NX Monitor

Notes

LCD Module

Diagonal:

51.0 cm/20.1 inches

Active matrix; thin film transistor (TFT)

Viewable Image Size:

51.0 cm/20.1 inches

liquid crystal display (LCD); 0.255 mm

Native Resolution (Pixel Count):

1600 x 1200

dot pitch; 250cd/m2 white luminence,

 

 

 

typical; 600:1 contrast ratio, typical.

 

 

 

 

Input Signal

Video:

ANALOG 0.7 Vp-p/75 Ohms

Digital Input: DVI-D

 

Sync:

Separate sync.TTL Level

 

 

 

Horizontal sync. Positive/Negative

 

 

 

Vertical sync. Positive/Negative

 

 

 

Composite sync. Positive/Negative

 

 

 

Sync on Green (Video 0.7V p-p and Sync Negative 0.3V p-p)

 

 

 

 

Display Colours

 

16,777,216

Depends on display card used.

 

 

 

 

Synchronization Range

Horizontal:

31.5 kHz to 91.1 kHz

Automatically

 

Vertical:

56.0 Hz to 85.0 Hz

Automatically

 

 

 

 

Viewing Angle

Left/Right:

±85° contrast ratio 10:1

 

 

Up/Down:

±85° contrast ratio 10:1

 

 

 

 

 

Resolutions Supported

 

720 x 400*1 at 85 Hz

Some systems may not

 

 

640 x 480*1 at 60 Hz to 85 Hz

support all modes listed.

 

 

800 x 600*1 at 56 Hz to 85 Hz

 

 

 

832 x 624*1 at 75 Hz

 

 

 

1024 x 768*1 at 60 Hz to 85 Hz

 

 

 

1152 x 864*1 at 75 Hz

 

 

 

1280 x 1024*1 at 60 Hz to 85 Hz

 

 

 

1600 x 1200*2 at 60 Hz

 

Active Display Area

Horizontal:

408 mm/16.1 inches

Dependent upon signal timing.

 

Vertical:

306 mm/12.0 inches

 

 

 

 

 

Power Supply

 

AC 100-240 V ~ 50/60 Hz

 

 

 

 

 

Current Rating

 

0.95 - 0.55 A

 

 

 

 

Dimensions

 

455.0 mm (W) x 391.3 - 461.7 mm (H) X 213.6 mm (D)

 

 

17.5 inches (W) x 15.4 - 18.2 inches (H) x 8.4 inches (D)

 

 

 

 

Weight

 

9.4 kg (20.7 lbs)

 

 

 

 

Environmental Considerations

 

 

Operating Temperature:

5 °C to 35 °C

 

 

Humidity:

30% to 80%

 

 

Altitude:

0 to 3,000 m

 

Storage Temperature:

-10 °C to +60 °C

 

 

Humidity:

10% to 85%

 

 

Altitude:

0 to 12,000 m

 

 

 

 

 

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

*2 NEC-Mitsubishi Electronics Display cites recommended resolutions at 60 Hz for optimal display performance.

NOTE: Technical specifications are subject to change without notice.

English-12

Page 13
Image 13
NEC user manual Monitor Specifications MultiSync LCD2060NX Monitor, English-12