NEC LCD223WM, LCD203WM Specifications AccuSync LCD193WM Monitor, English, Monitor Specifications

Specifications AccuSync LCD193WM Monitor

Monitor Specifications			AccuSync LCD193WM Monitor	Notes
LCD Module		Diagonal:	48.1 cm/19 inches	Active matrix; thin film transistor (TFT)
	Viewable Image Size:		48.1 cm/19 inches	liquid crystal display (LCD); 0.284 mm
Native Resolution (Pixel Count):			1440 x 900	dot pitch; 300 cd/m2 white luminance,
				1000:1 contrast ratio, typical.
Input Signal		Video:	ANALOG 0.7 Vp-p/75 Ohms
		Sync:	Separate sync.TTL Level (Positive/Negative)
			Horizontal sync. Positive/Negative
			Vertical sync. Positive/Negative
Display Colours		Analog input:	16,7 M	Depends on display card used.
Synchronization Range		Horizontal:	31.5 kHz to 81.1 kHz	Automatically
		Vertical:	56 Hz to 75 Hz	Automatically
Viewing Angle		Left/Right:	-88¡/+88¡ (CR>5)
		Up/Down:	-88¡/+88¡ (CR>5)
Resolutions Supported		Landscape:	720 x 400*1: VGA text	Some systems may not support all
			640 x 480*1 at 60 Hz to 75 Hz	modes listed.
			800 x 600*1 at 56 Hz to 75 Hz
			832 x 624*1 at 75 Hz
			1024 x 768*1 at 60 Hz to 75 Hz
			1152 x 864*1 at 60 Hz to 75 Hz
			1152 x 870*1 at 75 Hz
			1360 x 768*1 at 60 Hz	Recommended resolution is 60 Hz for
			1440 x 900 at 60 Hz to 75 Hz......................optimal display performance.
Active Display Area		Horizontal:	408.2 mm
		Vertical:	255.2 mm
Speakers	Practical Audio Output:		1.0 W + 1.0 W
Power Supply			100 - 240 V ~ 50/60 Hz
Dimensions		Landscape:	447.3 mm (W) x 374.6 mm (H) x 196.2 mm (D)
			17.6 inches (W) x 14.7 inches (H) x 7.7 inches (D)
Weight			5.5 kg
Environmental Considerations
	Operating Temperature:		5 ¡C to 35 ¡C
		Humidity:	30% to 80%
		Altitude:	0 to 4,572 m
	Storage Temperature:		-10 ¡C to +60 ¡C
		Humidity:	10% to 85%
		Altitude:	0 to 12,192 m

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

NOTE: Technical specifications are subject to change without notice.

English

English-11